Cavity Walls Create a Cost-Saving Cushion

If you have a brick house built after 1940, there's a good chance you are the proud owner of cavity walls. What does that mean, you may ask? It's simple: your exterior masonry is actually double-reinforced. These particular structures consist of two brick walls placed approximately 2-4 inches apart, forming a small gap of air between them. Unlike brick facades, both walls are load-bearing but are connected together through the use of small masonry ties. This double-construction not only gives your exterior frame more strength, it also comes with several other energy-saving advantages.

Water Resistance
Brick is very susceptible to water penetration. Moisture has a way of finding tiny hairline cracks in between the masonry and mortar, which eventually makes its way into the home. In cavity walls, the water will infiltrate the exterior fa?ade but, due to the air gap, the moisture won't be able to jump across to the actual interior wall. Instead, the water collects along the surface of the exterior wall and finds its way back out again through specially designed weepholes drilled into the brick.

Wind, Fire, and Rain
Not only are cavity walls resistant against rainfall and moisture penetration, it's also impervious to other natural hazards. Due to the double-protection, the exterior barrier can act as a shield against the elements that would normally affect the home. Brick is fire-resistant, which helps to protect the house and lowers your insurance premiums. It acts as a buffer against high winds, saving money on utility bills. Plus, their solid construction creates additional structural support against any damage that may ever occur.

Thermal Insulation
The most important benefit of cavity walls is their energy-efficient capabilities. Even if the interior gap is not filled in, the cushion of air between the two partitions can act as a natural insulator. During the winter, the hollow space between the two structures acts as a reservoir for air escaping the house, helping to reduce energy loss by holding in the heat. But, during the summer, it traps warm air and naturally moves it away from the house through the exterior wall. But all of this is greatly helped if the gap is filled in with cavity wall insulation.

Cavity Wall Insulation
If the hollow is unfilled, there's a good chance you're wasting money. Though the structure naturally insulates, it isn't nearly as efficient without some help. In fact, about 30-40 percent of home heat loss can be attributed to lack of proper insulation. Therefore, investing in cavity wall insulation regulates the internal temperature of the home, removes condensation build-up, reduces unnecessary energy waste, preserves our nation's natural resources, and eventually saves you big money on utility bills. The initial cost isn't much compared to the long-term savings (you should start seeing a return on your investment within a couple of years). Plus, it can be retroactively installed since it can be blown through the preexisting weepholes, or new holes can be quickly created and covered over within a matter of hours.